Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.6.2 Input HDCP setting
Menu
Top→INPUT SETTING→HDCP INPUT ENABLE
Setting for
Each input channel (only digital input signal)
Setting value
・HDCP 2.2 : Supports HDCP 2.2 and HDCP 1.4 [Default]: [IN1, IN2, IN8]
・HDCP 1.4 : Supports HDCP 1.4 [Default]: [IN3 to IN7]
・DISABLE : Not support HDCP
Some source devices negotiates with the connected device to determine if it supports HDCP encryption. After
this negotiation, the source device controls whether or not a signal may be sent to the device. This process
takes place with some source device, even if the content being presented is not copyright protected. The
MSD is HDCP compliant, if it is connected to a display device that does not support HDCP, video may not be
displayed. Under these circumstances and if the content is not protected, the problem can be solved by
setting this menu to "DISABLE."
Video with copyright
protection
Video without
copyright protection
HDCP
supported PC
[Fig. 9.11] HDCP-supported and HDCP-non-supported display devices
Notes:
・HDCP2.2 (stream type 0) contents can be displayed on sink devices supporting HDCP1.4.
・HDCP2.2 (stream type 1) contents can be displayed on sink devices supporting HDCP2.2 but cannot be
displayed on sink devices supporting HDCP1.4.
58
Input HDCP setting "HDCP2.2"
Input HDCP setting "DISABLE"
MSD-802UHD
【See: 9.6.5 Selecting signal of DVI input connector】
HDCP-non-supported sink device
HDCP supported sink device
HDCP supported/non-supported sink device
Video cannot be
displayed
Video can be displayed
Video can be displayed
Advertisement
Table of Contents
