Hdcp Input Enabled/Disabled [Hdcp Input Enable] - IDK msd-804fd User Manual

7.5.2

HDCP input enabled/disabled [HDCP INPUT ENABLE]

Some source devices check whether the connected device supports HDCP and then determine whether they
encrypt HDCP signals or not. Since the MSD is HDCP compliant, if it is connected to a display device that is
not HDCP compliant, the display device may not display video.
With this menu, you can set whether the MSD encrypts HDCP to the source device. "ENABLE" is set by
default, but if you want to connect the MSD to a display device that is not HDCP compliant, select "DISABLE"
to disable the encryption of HDCP output from the source device.
HDCP output
ON
HDCP output OFF
HDCP-compliant
PC
Note:
If you select "DISABLE" and connect a Blu-ray disc player or the like to the MSD, all video signals may not be
output. This is because Blu-ray disc players do not allow connection with any device that is not HDCP
compliant. In such a case, select "ENABLE" and connect an HDCP-compliant display device. Even if you
select "DISABLE" and video can be output, protected contents (movie, music video, and the like) still cannot
be played.
1. To enable/disable the HDCP input using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
INPUT SETTING
↓ SET key
[INPUT SETTING]
HDCP INPUT ENABLE
↓ SET key
[IN1 HDCP INPUT]
ENABLE
↓ ESC key: Returns to the previous screen.
2. To enable/disable the HDCP input using commands:
@SHE: Set HDCP input enabled/disabled
@GHE: Get HDCP input enabled/disabled
DIGITAL MSD-804FD
DISPLAY IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 OFF
MULTI POWER
S WITCHE R
1 OUT1
COMMAND COMMAND COMMAND COMMAND COMMAND
2 OUT2 A B C D E
POWER
ON 3 OUT3 MENU/SET
COMMAND
PRESET LOAD
OFF 4 OUT4 ESC
SWITCHING MODE
V&A VIDEO AUDIO
HDCP Setting =
"ENABLE"
DIGITAL DISPLAY MSD-804FD
POWER IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 OFF
MULTI
S WITCHE R
1 OUT1
COMMAND COMMAND COMMAND COMMAND COMMAND
A B C D E
2 OUT2
POWER
3 OUT3 MENU/SET
ON
COMMAND
PRESET LOAD
OFF
4 OUT4 SWITCHING MODE ESC
V&A VIDEO AUDIO
HDCP Setting =
"DISABLE"
[Fig. 7.18] Enabling/disabling HDCP input
Top
▲▼keys: Select "INPUT SETTING".
▲▼keys: Select "HDCP INPUT ENABLE".
▲▼keys: select "DISABLE" or "ENABLE".
◄►keys: Select the desired input (IN1 to IN8).
86
HDCP-non-compliant display device
HDCP-compliant PC
HDCP-compliant/non-compliant PC
MSD-804FD User's Guide
For each input
Video cannot be
displayed
Video can be
displayed
Only video without
copyright protection
can be displayed