Table of Contents
Advertisement
MSD-72 Series User's Guide
9.5.2 Setting HDCP input
Menu
Top→INPUT SETTING→HDCP INPUT ENABLE
Setting for
Each input channel (only digital input signal)
Setting value
HDCP 2.2
: Supports HDCP 2.2 and HDCP 1.4 [Default]: IN1 to IN3
HDCP 1.4
: Supports HDCP 1.4 [Default]: IN4 to IN9
DISABLE
: Not support HDCP
Some source devices check whether the connected device supports HDCP and then those source devices
decide whether they encrypt HDCP signal or not. Since the MSD is HDCP compliant, if it is connected to a
display device that does not support HDCP, video may not be displayed. In these cases, the problem can be
solved by setting this menu to "DISABLE".
Video with copyright
protection
Video without
copyright protection
HDCP
supported PC
[Figure 9.12] HDCP-supported and HDCP-non-supported display devices
Notes:
・HDCP2.2 (stream type 0) contents can be displayed on sink devices supporting HDCP1.4.
・HDCP2.2 (stream type 1) contents can be displayed on sink devices supporting HDCP2.2 but cannot be
displayed on sink devices supporting HDCP1.4.
62
Input HDCP setting "HDCP2.2"
Input HDCP setting "DISABLE"
MSD-7204UHD
Video cannot be
displayed
HDCP-non-supported sink device
Video can be displayed
HDCP supported sink device
Video can be displayed
HDCP supported/non-supported sink device
Advertisement
Table of Contents
