Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.13.3
Command link
Menu
Top→PRESET COMMAND→COMMAND LINK
Setting for
[Table 9.28] Control command execution condition (Example: MSD-802UHD)
Setting value OFF [Default], COMMAND 1 to COMMAND 32
The MSD has 59 command execution conditions as shown below. If these execution conditions are met,
control commands which are associated beforehand will be executed. One execution condition can be
associated to up to 10 commands. If several commands are associated, commands are executed in order of
registration. If the same command is associated several times, it is repeatedly executed.
Control command execution button can be toggled (COMMAND A to COMMAND I).
Set "TOGGLE" to "ON" to enable PLANE-B, and then you can select execution plane ("AUTO", "A(PLANE-A)",
or "B(PLANE-B)") at the time of power ON from "STARTUP". If you select "AUTO", the condition at the time of
power OFF will be maintained.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
CMD1
CMD2
CMD3
CMD4
CMD5
CMD30
CMD31
CMD32
[Table 9.28] Control command execution condition (Example: MSD-802UHD)
Execution condition
POWER ON
DISPLAY1 POWER ON
DISPLAY1 POWER OFF
VIDEO:OUT1-IN1 to
VIDEO:OUT1-IN8,
VIDEO:OUT1-OFF
AUDIO:OUT1-IN1 to
AUDIO:OUT1-IN8,
AUDIO:OUT1-OFF
COMMAND A to
COMMAND I,
PLANE-A
106
Control commands
Linking
Execution order
[Fig. 9.27] Command link
Function
Controlling power
switch
Controlling sink device
power of OUT1
Selecting video input
channel of OUT1
Selecting audio input
channel of OUT1
Command control
Execution condition
POWER ON
DISPLAY1 POWER ON
1st
COMMAND 3
COMMAND 4
2nd
COMMAND 1
3rd
4th
5th
6th
7th
8th
9th
10th
st
th
Default: OFF for 1
to 10
Execution condition
-
DISPLAY2 POWER ON
DISPLAY2 POWER OFF
VIDEO:OUT2-IN1 to
VIDEO:OUT2-IN8,
VIDEO:OUT2-OFF
AUDIO:OUT2-IN1 to
AUDIO:OUT2-IN8,
AUDIO:OUT2-OFF
COMMAND A to
COMMAND I,
PLANE-B
Function
-
Controlling sink device
power of OUT2
Selecting video input
channel of OUT2
Selecting audio input
channel of OUT2
Command control
Advertisement
Table of Contents
