To Remove the Key Switch
Caution – Ensure that the power to the storage system is off. See Sun StorEdge 3900
and 6900 Series 1.1 Installation Guide for a description of powering off the storage
system.
1. Disconnect the key switch cable connector from the adapter-cable connector near
the back of the power sequencers (
a. The adapter cable remains connected to the power sequencer.
FIGURE 10-3
2. Facing the back of the key switch on the inside of the storage system, use a pair of
needle-nose pliers to slide out and remove the metal clip that secures the key
switch to the storage system (
10-6
Sun StorEdge 3900 and 6900 Series 1.1 Reference and Service Manual • July 2002
Key switch
cable connector
Key Switch Cable Connector
).
FIGURE 10-3
).
FIGURE 10-4