Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 123

Setup Virtualization Engine Hosts–Sets the parameter settings of the
virtualization engine. The password for all virtualization engines is the same.
The password is set with the VEPASSWD environment variable. The parameter
settings include the Ethernet, host side settings, device side settings, and SV
management programs.
Checking for VEPASSWD env variable ......
v1a login success
Verifying Virtualization Engine host v1b........
Reading v1b configuration
Router Management config
Host side WWN Authentications are set properly
Host IP Authentications are set properly
other VEHOST IP is set properly
Device side configuration
Operating Mode is set properly
UID reporting scheme is set properly
Host side configuration
Host side Operating Mode is set properly
LUN Mapping Mode is set properly
Command Queue Depth is set properly
UID distinguish is set properly
UID reporting scheme is set properly
Network Configuration
IP set properly
Sub net mask is properly
Default gateway set properly
Server port number is set properly
v1b configuration check passed
Virtualization Engine host v1b verified successfully. Setup is not
required.
Chapter 5 Configuration Utilities 5-45