Figure 8-6 Power Cable Routing - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

L9
L11
L8
L10
L7
L6
L5
L4
L3
L2
L1
Rear view
FIGURE 8-6
Caution – Power cable routing can vary, depending on how the storage system is
configured.
9. Install the trim strips (
Use a No. 2 Phillips screwdriver to tighten the captive screws.
10. If necessary, retract the stabilizer legs under the storage system.
11. If necessary, close the front screen door.
If you formerly removed the door, refer to Section 7.2, "Removing and Replacing the
Front Door" on page 7-2.
12. Replace the side panels, if you removed them.
See Section 7.3, "Removing and Replacing the Side Panel" on page 7-2 for a
description of replacing side panels.
R9
R11
R8
R10
R7
R6
R5
R4
R3
R2
R1
Power Cable Routing
FIGURE 8-5
L6
Front
sequencer
L1 & L2
R6
Rear
sequencer
R1 & R2
).
Chapter 8 Installing and Removing FRUs
L8 & L10 L4 L9 & 11
L7 L3 L5
R8 & R10 R4 R9 & R11
R7 R3 R5
8-9