Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 93

Create Sun StorEdge T3+ Array Group–This option enables you to create a
Sun StorEdge T3+ array group, which can then be used to set/mask LUN
permissions. After selecting a Sun StorEdge T3+ array, you must enter the
WWN to be associated with the new group. You may also add an initial LUN
into this group and set permissions on it.
AVAILABLE Sun StorEdge T3+ Array(s)
1) t3b0
2) Return
Select option above:> 1
Enter a group name (15 alphanumeric characters or less): group1
Enter the associated Host Bus Adapter WWN: 1234567890123456
Do you want to set permissions for a LUN to this group now? [y|n]: y
AVAILABLE T3+ LUNs MENU
1) slicep0(LUN0)
2) slicep1(LUN1)
3) test020(LUN4)
...
12) test042(LUN14)
Select option above:> 2
LUN PERMISSIONS MENU
1) rw
2) ro
3) none
Select option above:> 1
Creating group group1 with WWN 1234567890123456 as a group element
on t3b0
Successfully created group group1
t3b0 Configuration is being saved
Chapter 5 Configuration Utilities 5-15