Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 101

When you select this option, you can select from a list of the Sun StorEdge
network FC switches or select all switches.
Busy SUN Switches
-------------------
NOTE : Currently NO Sun Switches are being configured.
AVAILABLE SWITCHES
1) sw1a
2) sw1b
3) sw2a
4) sw2b
5) ALL
6) Return
Select option above:> 1
Do you want to compare current configuration to saved map file
instead of default configuration [y|n] : y
PASSED verification on switch sw1a, no differences found.
Set Switch Config–Configures the specified switch to a predefined static
configuration based on cabinet type and location (top or bottom switch for Sun
StorEdge 6900 series subsystems). For cascaded SAN environments you can
override the default values for hard zone IDs and chassis IDs. The following is
example output:
Busy SUN Switches
-------------------
NOTE : Currently NO Sun Switches are being configured.
WARNING: Modifying the switch configuration may disrupt traffic.
Do you want to continue? [y n] y
AVAILABLE SWITCHES
1) sw2a
2) sw2b
3) ALL
4) Return
Select option above:> 1
Default chassis id = 3. Do you want to override the default chassis
id [y|n] : n
Configuring switch sw2a to default configuration...
setupswitch: sw2a INFO: Flash revision on switch is 30462.
setupswitch: sw2a INFO no changes required, already properly set.
Chapter 5 Configuration Utilities 5-23