Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 113

Create Virtualization Engine Zones–Enables you to create a single
virtualization zone or multiple zones with a single batch execution. You are
presented with a listing of the available virtualization engine pairs, initiators
and WWNs and then asked to enter a zone and HBA alias name.
Do you want to create single or multiple zone(s) [s|m] : s
BUSY VIRTUALIZATION ENGINE PAIRS
--------------------------------
NOTE : Currently NO virtualization engine pair(s) are being configured.
AVAILABLE VIRTUALIZATION ENGINE PAIRS
1) v1
2) v2
3) Return
Select option above:> 2
AVAILABLE VIRTUALIZATION ENGINE INITIATORS
1) I00001
2) I00002
3) Return
Select option above:> 1
AVAILABLE WWN NUMBERS
1) 210000E08B047FC0
2) 210000E08B0480C0
3) Return
Select option above:> 1
Please enter the zone name (Recommendation : host_channelID , Note : There is
a max length of 15 chars for the zone name): ztest
Do you want to specify an alias name for the HBA ?
(Note : alias name - is the user-defined HBA alias for the associated WWN
channel, if not specified the zonename will be used.
be used when multiple HBAs are in a single zone, as in clusters). [y|n] : y
Please enter the HBA alias name (Note : There is a max length of 15 chars for
the alias name): hbatest
Creating Virtualization Engine zone ........
HBA alias hbatest : created successfully.
zone ztest : created successfully on v2 initiator I00001.
NOTE: Updating map, v2 will be unavailable until completed.
Unique names should
Chapter 5 Configuration Utilities 5-35