To Replace The Service Panel - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

To Replace the Service Panel

1. Place the new service panel in its location and replace the screws on the left side
to hold the service panel in place on the storage system.
2. Open the service panel and reconnect the cables removed from the inside of the
previous service panel to the inside of the service panel. Make certain to connect
them in the same position.
3. Close the service panel and replace the screws on the right side of the panel.
4. Replace all the cables that were removed from the outside of the previous service
panel. Make certain to connect them in the same position.
11-6 Sun StorEdge 3900 and 6900 Series 1.1 Reference and Service Manual • July 2002