Virtualization Engine Settings; Table 3-1 Standard Virtualization Engine Settings - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

3.2

Virtualization Engine Settings

The standard settings for the virtualization engine are given in
TABLE 3-1
Device Side Settings
Host Side Settings
Ethernet
SV Management Programs
1 - The other router's IP address is based on virtualization engine pairs. v1a and v1b are a pair and so are v2a and v2b. The value that
must be entered is the IP address of the other router in the pair. For instance, if you are setting up the v1a, you enter the IP address of
v1b.
2- The password selections do not set the password for telnet(1) or ftp(1). These passwords are set by the Ethernet setting.
3-4 Sun StorEdge 3900 and 6900 Series 1.1 Reference and Service Manual • July 2002
Standard Virtualization Engine Settings
Standard Virtualization Engine Settings
Operating mode:
UID reporting scheme:
Operating mode:
LUN mapping mode:
Command queue depth:
Host Side/Device Side UID distinguish:
UID reporting scheme:
Subnet mask:
Default gateway:
IP address:
Server port number (5000-65535):
Router management program access
Host WWN authentications
Host IP authentications
Other router's IP
Password Protection is
Password is
TABLE 3-1
Pt-to-pt mode
Port
Pt-to-pt mode
Direct LUN mapping
0
Enable
Port
255.255.255.0
192.168.0.1
v1a - 192.168.0.20, v1b - 192.168.0.21,
v2a - 192.168.0.22, v2b - 192.168.0.23
25000
Enabled
1. Unassigned
2. Unassigned
1. 255.255.255.255, 2. 255.255.255.255
1
n.n.n.n
2
Disabled
2
Invalid
.