To Replace A Sun Storedge T3+ Array - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

6. Ensure that the RARP daemon (in.rarpd(1M)) is running on the Storage Service
Processor.
msp0# /bin/ps -eaf | grep rarpd
root 317 314
msp0#
If the daemon is not running, start it with the following command:
msp0# /usr/sbin/in.rarpd dmfe 1

To Replace a Sun StorEdge T3+ Array

1. Install the new Sun StorEdge T3+ array and turn on the partner group.
2. From the Storage Service Processor use the telnet command to open a session
with one Sun StorEdge T3+ array.
# /bin/telnet Sun-StorEdge-T3+-name
login: root
Password:
:/:<1>
3. Set a password on the Sun StorEdge T3+ array if it has not already been done.
Note – For Sun StorEdge 3900 and 6900 series systems, all Sun StorEdge T3+ arrays
in a cabinet must use the same password. If one of the other arrays already has a
password set, you must use the same password for the new array.
:/:<1> passwd
OLD password:
NEW password: new password
NEW password (confirm): new password
:/:<2>
0 Sep 28 ?
Return
T3B Release 2.01.00 2002/03/22 18:35:03 (192.168.0.40)
Copyright (C) 1997-2001 Sun Microsystems, Inc.
All Rights Reserved.
Return
0:00 /usr/sbin/in.rarpd dmfe 1
Chapter 14 Servicing Sun StorEdge T3+ Arrays 14-3