Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 180

1. Type:
annex: telnet 10.0.0.3
Note – If the Storage Service Processor LAN has been reconfigured to a domain
other than 10.0.0.n, you must obtain the valid Ethernet address from the
administrator of the new domain.
Trying 10.0.0.3...
Connected to 10.0.0.3.
Escape character is '^]'
2. Type:
2
The "2" is the port of the annex where the Storage Service Processor console is
attached. The following login prompt is displayed.
msp0 console login:
If the prompt is not as shown above, type:
tty
The following output is displayed:
/dev/console
This output indicates that the last login was not properly terminated. You can
now perform the functions you need to perform.
12-4 Sun StorEdge 3900 and 6900 Series 1.1 Reference and Service Manual • July 2002