Servicing The Storage Service Processor With The Sun Storedge Remote Response Enabled - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

The "2" is the port of the annex where the Storage Service Processor console is
attached. The following login prompt is displayed.
msp0 console login:
Password
Refer to the "Servicing the Storage Service Processor With the Sun StorEdge Remote
Response Enabled" on page 12-7 for instructions on responding to the OPIE
challenge.
4. If the prompt is not as shown above and is not the OK prompt, type:
tty
The following output is displayed:
/dev/console
This output indicates that the last login was not properly terminated. You can
now perform the functions you need to perform.
If the OK prompt displays, refer to the Netra X1 Server User's Guide for the
troubleshooting procedure.
12.3 Servicing the Storage Service Processor
With the Sun StorEdge Remote Response
Enabled
If you must log into the Storage Service Processor that has the Sun StorEdge Remote
Response option enabled, you need to respond to the one-time passwords in
everything (OPIE) security challenge.
The following procedure gives the instructions for responding to the challenge. This
procedure is mandatory each time you log in to a Storage Service Processor.
Chapter 12 Servicing the Storage Service Processor 12-7