Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 109

Create VLUNs–Enables you to create VLUNs in a single disk pool or all
VLUNs across multiple disk pools with a single batch execution. You are
presented with a listing of the available virtualization engine pairs. For
example:
Do you want to create VLUNs in a single or multiple disk pools [s | m]: s
BUSY VIRTUALIZATION ENGINE PAIRS
--------------------------------
NOTE : Currently NO virtualization engine pair(s) are being configured.
AVAILABLE VIRTUALIZATION ENGINE PAIRS
1) v1
2) v2
3) Return
Select option above:> 2
DISK POOLS (free space)
1) t3b10(474.2GB)
2) t3b11(477.2GB)
3) Return
Select option above:> 1
NOTE : Creation of each VLUN can take up to 1 minute.
Please enter the number of VLUN(s) that need to be created: 2
Please enter the size in GB for each VLUN (1 GB increments): 2
Do you want to specify the zones ? [y|n]: n
Do you want to specify a name for the VLUN? [y|n]: y
Please enter a name for the VLUN (There is a max length of 10 chars including a
unique id prefix that will be added automatically):test
This functionality requires a check that T3+ physical lun is mounted.
Please enter the Sun StorEdge T3+ Array password: password
Creating VLUN(s) on v2 ........
Checking that associated T3+ physical lun is mounted...
VLUN T16387 : Created successfully in diskpool t3b10 with name 1test.
VLUN T16388 : Created successfully in diskpool t3b10 with name 2test.
NOTE: Updating map, v2 will be unavailable until completed.
WARNING: VLUNs just created were not added to any zones.
This should be done to avoid data corruption.
Refer to addtovezone command.
Chapter 5 Configuration Utilities 5-31