setupve(1M)–Sets the parameters to the default values for the specified
virtualization engine. The parameter settings include the Ethernet, host side
settings, device side settings, and SV management programs.
showvemap(1M)–Displays the current configuration saved in the map file for the
specified virtualization engine.
startslicd(1M)–Starts the slicd daemon on the Storage Service Processor of
the Sun StorEdge 6900 series storage subsystem. The slicd provides the
communication channel between the virtualization engines and the Sun StorEdge
6900 series subsystems.
Chapter 5 Configuration Utilities
5-55