Sun Storedge T3+ Array Partner Group Syslog.conf Configuration; Sun Storedge Network Fc Switch Settings - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

3.3.1 Sun StorEdge T3+ Array Partner Group
syslog.conf Configuration
To ensure that the Storage Service Processor is aware of the condition of each Sun
StorEdge T3+ array partner group tray within these storage subsystems, the arrays
are configured to send their syslog.conf information back to the Storage Service
Processor.
The information that is placed in each Sun StorEdge T3+ array partner group is as
follows:
# syslog.conf
# facility.level action
# messages to local syslog file
*.info
# messages to syslogd on another host
*.notice
# messages sent as SNMP traps
# messages sent as HTTP pushes
*.info
3.4 Sun StorEdge Network FC Switch
Settings
This subsection presents a series of tables that provide information about the default
settings for the Sun StorEdge network FC switch-8 and switch-16 switches. This
information includes the following:
Sun StorEdge network FC switch-8 and switch-16 parameters
Sun StorEdge 3910 system switch configuration
Sun StorEdge 3960 systems switch configuration
Sun StorEdge 6910 and 6910SL system switch configuration
Sun StorEdge 6960 and 6960SL system switch configuration
3-12 Sun StorEdge 3900 and 6900 Series 1.1 Reference and Service Manual • July 2002
/syslog
@192.168.0.1
| http_push