Sun Storedge T3+ Array Configuration Utility Main Menu - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

5.2.1 Sun StorEdge T3+ Array Configuration Utility
Main Menu
The Sun StorEdge T3+ array main menu presents the following choices. Note that
you are first prompted for the Sun StorEdge T3+ array password—if one is set.
Retrieving list of available Sun StorEdge T3+ Array(s).........
Checking and validating PASSWD env variable for Sun StorEdge T3+
Array .........
Please enter the Sun StorEdge T3+ Array password:
Validating Sun StorEdge T3+ Array password .........
Sun StorEdge T3+ Array MAIN MENU
1) Display Sun StorEdge T3+ Array(s)
2) Save Sun StorEdge T3+ Array Configuration
3) Configure Sun StorEdge T3+ Array(s)
4) Restore Sun StorEdge T3+ Array Configuration
5) Verify Sun StorEdge T3+ Array Configuration
6) Modify Sun StorEdge T3+ Array Sys Parameters
7) Display Sun StorEdge T3+ Array(s) Configuration Status
8) Manage Sun StorEdge T3+ Array LUN Slicing
9) Manage Sun StorEdge T3+ Array LUN Masking
10) Help
11) Return
Select option above:>
Display Sun StorEdge T3+ Array Configuration–Reads and displays
configuration information for the specified Sun StorEdge T3+ array partner
group. It includes output from the following Sun StorEdge T3+ array commands:
ver
sys list
vol list
vol stat
port list
port listmap
fru stat
volslice list (Used only if volslice is enabled.)
lun map list (Used only if volslice is enabled.)
lun perm list (Used only if volslice is enabled.)
lun wwn list (Used only if volslice is enabled.)
hwwn list (Used only if volslice is enabled.)
Chapter 5 Configuration Utilities 5-3