Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 223

11. Run the na command to setup the NTC serial ports, for example:
# cd /opt/annex
# ./na
Annex network administrator R14.1 October 22nd, 1997
command: annex 10.0.0.10
10.0.0.10: Micro-Annex-UX R10.0, 8 async ports
command: read /var/spool/erpcd/bfs/config.ports
setting annex parameters
setting parameters for async port 1
setting parameters for async port 2
setting parameters for async port 3
setting parameters for async port 4
setting parameters for async port 5
setting parameters for async port 6
setting parameters for async port 7
setting parameters for async port 8
setting parameters for interface en0
setting parameters for interface asy1
setting parameters for interface asy2
setting parameters for interface asy3
setting parameters for interface asy4
setting parameters for interface asy5
setting parameters for interface asy6
setting parameters for interface asy7
setting parameters for interface asy8
command: quit
#
12. Power off and power on the NTC.
13. Test the dial in and dial out capability of the modem.
Chapter 16 Servicing the Network Terminal Concentrator 16-9