Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 85

Restore Sun StorEdge T3+ Array Configuration–Restores the Sun StorEdge T3+
array configuration with the static saved configuration from the snapshot file.
This function might be needed if you lose a LUN or must replace a Sun StorEdge
T3+ array.
When you select this option you can select from a list of the Sun StorEdge T3+
array partner groups or select all partner groups.
Busy Sun StorEdge T3+ Array(s)
------------------------------
NOTE : Currently NO Sun StorEdge T3+ Array(s) are being
configured/restored.
AVAILABLE Sun StorEdge T3+ Array(s)
1) t3b0
2) t3b1
3) ALL
4) Return
Select option above:> 2
Sun StorEdge T3+ Array RESTORE LUN OPTION MENU
1) Lun 1
2) Lun 2
3) All Luns
4) Return to Sun StorEdge T3+ Array Menu
Select lun(s) to restore (t3b1):> 1
NOTE:
The restore option may destroy data on the lun(s) based on results
of the check operation. Do you want to FORCE a destructive
recreation of lun(s) even if the selected configuration is the same
as the saved configuration ?[y|n] : n
Sun StorEdge T3+ Array - t3b1
NOTICE: This will take a minimum of approximately 2 hours!
Please view /var/adm/log/SEcfglog for more details and progress.
Please execute 'View Errors' from the main menu to view errors
encountered.
After completion of t3b1 restoration,it will be available for
'Verify Sun StorEdge T3+ Array Configuration'.
is being restored now.
Chapter 5 Configuration Utilities 5-7