Servicing The Storage Service Processor; Table 12-1 Storage Service Processor Fru List - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

12
C H A P T E R
Servicing the Storage Service
Processor
This chapter describes the removal and replacement of the Storage Service Processor.
All Storage Service Processors are configured in the factory as a master Storage
Service Processor, which gives them the primary role of aggregating multiple storage
processors into one administrative point as well as controlling the alerts and
forwarding them to the designated service providers.
The IP addressing of the aggregation of Storage Service Processors is dictated by the
/etc/inet/hosts file. The default settings in that file for all Storage Service
Processors shipped by Sun have the IP address set to 10.0.0.10 and the name set to
msp0.
This chapter is organized as follows:
"Preliminary Steps" on page 12-2
"Connecting to the Storage Service Processor" on page 12-2
"Servicing the Storage Service Processor With the Sun StorEdge Remote Response
Enabled" on page 12-7
"Servicing the Storage Service Processor Without the Sun StorEdge Remote
Response Enabled" on page 12-12
"Replacing the Storage Service Processor" on page 12-16
TABLE 12-1
TABLE 12-1
FRU Description
Storage Service Processor
Standard cable
lists the FRUs associated with the Storage Service Processor.
Storage Service Processor FRU List
Part Number
N19-UPE1-9S-512AX1
530-2093-01
12-1