Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 88

Display Sun StorEdge T3+ Array(s) Configuration Status–Displays the name of
the Sun StorEdge T3+ arrays that are being configured or restored. If none are
being configured or restored, the following message is displayed and you return
to the Main Menu.
Currently NO Sun StorEdge T3+ Arrays are being configured or
restored.
Manage Sun StorEdge T3+ Array LUN Slicing–Enables you to display slice
information, create a slice, remove a slice, and enable slicing.
MANAGE Sun StorEdge T3+ Array LUN SLICING MENU
1) Display Sun StorEdge T3+ Array LUN Slice/Mask Info
2) Create Sun StorEdge T3+ Array LUN Slice
3) Remove Sun StorEdge T3+ Array LUN Slice
4) Enable Sun StorEdge T3+ Array Volume Slicing
5) Return
Select option above:>
Caution – To unset the Sun StorEdge T3+ array volume slicing, you must use the
instructions provided in the Sun StorEdge T3+ Array Installation, Operation, and
Service Manual.
5-10 Sun StorEdge 3900 and 6900 Series 1.1 Reference and Service Manual • July 2002