Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 220

Expect to see the following prompt:
monitor::
7. Configure the Ethernet interface, for example:
monitor:: seq net
Interface sequence: net
monitor:: addr
Enter Internet address [<uninitialized>]:: 10.0.0.10
Internet address: 10.0.0.10
Enter Subnet mask [255.255.0.0]:: 255.0.0.0
Subnet mask: 255.0.0.0
Enter Preferred load host Internet address [47.16.116.5]:: 10.0.0.10
Preferred load host address: 90.0.0.1
Enter Broadcast address [0.0.0.0]:: 10.0.0.255
Broadcast address: 10.0.0.255
Enter Preferred dump address [0.0.0.0]:: 10.0.0.10
Select type of IP packet encapsulation (ieee802/ethernet) [<ethernet>]::
Type of IP packet encapsulation: <ethernet>
Load Broadcast Y/N [N]::
monitor:: image
Enter Image name [(ip)"oper.52.enet",
(mop)"OPER_52_ENET.SYS"]:: (mop)"OPER_52_ENET.SYS"]:: oper.52.enet
Enter TFTP Load Directory [""]::
Enter TFTP Dump path/filename ["dump.10.0.0.10"]::
16-6 Sun StorEdge 3900 and 6900 Series 1.1 Reference and Service Manual • July 2002