To Replace The Key Switch; Figure 10-4 Removing And Replacing The Key Switch - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

Metal clip
Key switch
Removing and Replacing the Key Switch
FIGURE 10-4
3. Pull the key switch out of the chassis opening.

To Replace the Key Switch

1. Insert the key switch into the panel opening.
2. Facing the back of the key switch on the inside of the storage system, slide the
metal clip onto the notch of the key switch body to secure it in place (
Each screw secures a clamp on the frame that holds the cable in place.
3. Connect the key switch cable connector to the adapter-cable connector near the
back of the power sequencer (
4. Power on the storage system.
See Sun StorEdge 3900 and 6900 Series 1.1 Installation Guide for a description of
powering on the storage system.
).
FIGURE 10-3
Chapter 10 Servicing the Expansion Cabinet
).
FIGURE 10-4
10-7