Configuration Features; Standalone With No Remote Service - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

4
C H A P T E R

Configuration Features

This chapter describes the features associated with each of the supported Sun
StorEdge 3900 and 6900 series configurations.
This chapter is organized as follows:
"Standalone With No Remote Service" on page 4-1
"Multiple Units With No Remote Service" on page 4-2
"Remote Service to a Single Unit With No Host Connection" on page 4-3
"Remote Service to Multiple Units With No Host Connection" on page 4-4
4.1

Standalone With No Remote Service

A standalone Sun StorEdge 3900 or 6900 series storage subsystem can be configured
with no remote service.
In a standalone configuration with no remote service option, the Storage Service
Processor must be configured as a master service processor.
The features supported in this configuration are:
Storage Automated Diagnostic Environment
Management of components using the Configuration Utilities
Local or host access to monitoring, component management, and alerts
One customer IP address (required to enable communication with the customer's
internal LANs)
4-1