Remote Service To A Single Unit With No Host Connection; Figure 4-2 Remote Service To A Single Unit With No Host - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

Host-based diagnostic or monitoring agents (for example, topology)
Aggregation of Storage Service Processors
Multiple customer IP addresses required (one per Storage Service Processor)
4.3 Remote Service to a Single Unit With No
Host Connection
This configuration offers remote service to a single Storage Service Processor
without aggregation of Storage Server Processors. This configuration does not
support connection to a customer host.
In any configuration implementing remote service, the Storage Service Processor
attached to port 2 of the network terminal concentrator is the master Storage Service
Processor.
Application
server (host)
FIGURE 4-2
Ethernet hub LAN
Remote Service to a Single Unit With No Host
Modem
Service panel
Storage Service
Processor
NTC
Component
Net
Chapter 4 Configuration Features 4-3