Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 115

Delete Components from Virtualization Engine Zones–Enables you to
remove VLUNs or HBAs from existing virtualization engine zones. You are
presented with a listing of the available virtualization engine pairs and zones.
BUSY VIRTUALIZATION ENGINE PAIRS
--------------------------------
v1
AVAILABLE VIRTUALIZATION ENGINE PAIRS
1) v2
2) Return
Select option above:> 1
Enter v to delete vluns or h to delete HBAs (cluster support) [v|h]: v
AVAILABLE ZONES FOR (I00001, I00002)
1) pad_3(I00001)
2) gdsjdtj(I00001)
3) lasttr(I00001)
4) ztest(I00001)
5) pad_4(I00002)
6) Return
Enter zone numbers from the list above (multiple entries are space separated):>1
INFO: VLUNs will be added to the zone(s) pad_3.
Enter y to continue or n to select zones again. [y|n]: y
AVAILABLE VLUN TARGET ID(s)
1) T16384(1asdfg45)
2) T16385(2asdfg45)
3) T16386(3asdfg45)
...
9) T16392(VDRV008)
10) T16393(VDRV009)
11) T16394(VDRV010)
Select option above:> 1
Do you want to specify a range of target ids [y|n]: n
Deleting components from Virtualization Engine zone ........
ERROR: Unable to remove VLUN T16384 from zone pad_3.
Virtualization engine command exited with error 167.
Drive not found in the zone.
NOTE: Updating map, v2 will be unavailable until completed.
12) T16395(VDRV011)
13) T16396(VDRV012)
14) T16397(VDRV013)
...
20) T16403(7pa)
21) Return
Chapter 5 Configuration Utilities 5-37