To Connect To The Storage Service Processor - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

To Connect to the Storage Service Processor

1. Connect to the Storage Service Processor using the telnet(1) command.
# /bin/telnet 10.n.n.n
Trying 10.0.0.10...
Connected to 10.0.0.10.
Escape character is '^]'.
2. Log in as cmdadm.
login: cmdadm
Password: password
3. The OPIE security software will generate a challenge code. For example:
Challenge: 494 ms3219
4. Call the Sun Solution Center at 1-800-USA-4SUN and provide them with the
Radiance case number and challenge code. The Sun Solution Center
representative will supply the appropriate response code.
5. Enter the response code provided by the Sun Solution Center, for example:
Response: response_provided
6. Become root:
msp0# su -
Password: password
7. Proceed with the typical telnet(1) session and service the Storage Service
Processor.
12-8 Sun StorEdge 3900 and 6900 Series 1.1 Reference and Service Manual • July 2002