Menu-Driven Character User Interface - Sun Microsystems StorEdge 3900 Series Reference And Service Manual

5.2

Menu-Driven Character User Interface

The menu-driven character user interface to the configuration utility is accessed
using the runsecfg(1M) command. This utility enables you to:
Configure, check, and display information about the attached Sun StorEdge T3+
array partner groups
Configure, check, and display information about the attached Sun switches
Configure, check, and display information about the attached virtualization
engines
Determine the storage subsystem type and model number
View detailed configuration utility messages in the log file
View errors only from the log file
Caution – Do not run the Configuration Utilities at the same time you are using the
Storage Automated Diagnostic Environment diagnostics software.
You must log into the Storage Service Processor using the instructions given in
Chapter 12, then you can start the runsecfg command. Once started, runsecfg
displays the following menu:
# /opt/SUNWsecfg/runsecfg
Determining cabinet type...
MAIN MENU - SUN StorEdge 6960 SYSTEM CONFIGURATION TOOL
SUNWsecfg VERSION:
1) T3+ Configuration Utility
2) Switch Configuration Utility
3) Virtualization Engine Configuration Utility
4) View Logs
5) View Errors
6) Exit
Select option above:>
Note – If you have a Sun StorEdge 3900 series, you will not see the choice for the
Virtualization Engine Configuration Utility.
5-2 Sun StorEdge 3900 and 6900 Series 1.1 Reference and Service Manual • July 2002
RELEASE 1.5.4