Sun Microsystems StorEdge 3900 Series Reference And Service Manual page 106

Set Switch Port Fabric Mode (Sun StorEdge 3900 Series only)–Sets the switch
port fabric (F port) mode on the specified switches. If you select on all ports in
specified port list on the switch are set to Fabric mode. If you specify off the
Fabric mode is cleared and the ports are returned to the predefined configuration.
This selection is especially useful for full Fabric configurations to set Sun
StorEdge T3+ array device-side ports to type F (Fabric).
Busy SUN Switches
-------------------
NOTE : Currently NO Sun Switches are being configured.
AVAILABLE SWITCHES
1) sw1a
2) sw1b
3) Return
Select option above:> 1
Available Port Settings
1) Set Fabric Mode
2) Clear Fabric Mode
3) Return
Select option above:> 1
Please enter a comma seperated list of port numbers that are
connected to T3+ devices (i.e. odd port numbers such as 1,5,7) or
all : all
Setting switch to fabric mode ......
Setting fabric mode (F port type) on for specified ports - 1 2 3
4 5 6 7 8 9 10 11 12 13 14 15 16.
Setting Port 1 on sw1a to F mode
Setting Port 2 on sw1a to F mode
Setting Port 3 on sw1a to F mode
Setting Port 4 on sw1a to F mode
...
5-28 Sun StorEdge 3900 and 6900 Series 1.1 Reference and Service Manual • July 2002