Introducing Key Screens And Commands; The Controller Firmware Initial Screen - Sun Microsystems StorEdge 3000 Series Installation, Operation And Service Manual

7.1

Introducing Key Screens and Commands

This section introduces the initial and the Main Menu RAID controller firmware
screens.
7.1.1

The Controller Firmware Initial Screen

You see the following initial controller screen when you first access the RAID
controller firmware via the controller COM port or Ethernet port.
To complete the connection to your management console, select the VT100 terminal
mode or the appropriate mode for your communications software, and press Return.
Progress indicator
Battery charging status
Transfer rate indicator
Navigation keys
TABLE 7-1
Component
Cursor bar
Controller name
Progress indicator
Transfer rate indicator
Gauge range
Cache status
7-2 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • March 2004
Date and time Controller name or inquiry string
Components of the Controller Firmware Window
Description
Move the cursor bar to a desired item, and then press
Return to select.
Identifies the type of controller.
Indicates the current progress of an event.
Indicates the current data transfer rate.
Use + or – keys to change the transfer rate indicator's
range. The default is 10 Mbyte per second.
Indicates the percentage in the controller cache that
differs from what is saved to disk.
Cache status
Gauge range