Figure E-11 Replacing The Key Switch Assembly In The Enterprise 6500/5500 Systems - Sun Microsystems Enterprise 6500 Reference Manual

FIGURE E-11
E.2.5.2 Replacing the Key Switch Assembly
1. Insert the key switch assembly into the cabinet until it is seated properly.
The key switch assembly is seated properly when the screw holes align with the
cabinet pillar (
2. Replace the two screws on the right side that attach the key switch assembly to
the cabinet pillar.
You can access the two screws through the space previously occupied by the media
tray (
3. Replace the screw on the left side that attaches the key switch assembly to the
cabinet pillar (
4. Connect the key switch cable assembly into the back of the key switch assembly.
5. Replace the media tray into the cabinet using the support system cabinet CD shelf
as a guide.
When seated properly, the media tray is flush with the key switch assembly in the
cabinet.
Replacing the Key Switch Assembly in the Enterprise 6500/5500 Systems
).
FIGURE E-11
).
FIGURE E-10
).
FIGURE E-9
Appendix E Non-Chassis Field Replaceable Units (FRUs) E-15