11
C H A P T E R
Servicing the Service Panel
This chapter provides instructions to repair and replace the service panel. This
chapter is organized as follows:
"Service Panel Overview" on page 11-1
"To Remove the Service Panel" on page 11-5
"To Replace the Service Panel" on page 11-6
TABLE 11-1
TABLE 11-1
FRU Description
Service processor service panel
The following tool is required for the replacement of the service panel:
1/4-inch slotted screwdriver
11.1
Service Panel Overview
The access to the Storage Service Processor is through the service panel, which is
bolted to the back of the Sun StorEdge 3900 and 6900 series storage system inside the
back cover. The functions of the Storage Service Processor are carried out through a
console cable connected from the serial console port on the service panel to a laptop
or a serial port of a workstation or server. The cables and DB9 and DB25 adapters are
shipped with the storage system.
lists the FRU associated with the service panel.
Service Processor Service Panel FRU List
Part Number
540-5177-01
11-1