Concluding Steps - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Ê Using a pair of side-cutting pliers, cut the microSD card in half.
Ê Install the new microSD card on the Dual microSD 64GB Enterprise.
Proceed as described in the following:
Ê With the label facing up, insert the microSD card into the microSD slot on
the controller until it locks in place (see figure
Ê Install the Dual microSD 64GB Enterprise, see section
microSD 64GB Enterprise" on page

14.6.4.3 Concluding steps

"Reassembling" on page 68
Ê
"Connecting the power cord" on page 81
Ê
"Switching on the server" on page 82
Ê
TX2550 M4
439.
Upgrade and Maintenance Manual
System board and components
324 on page
"Installing the Dual
447).
449