Installing The Slot Cover - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Ê Remove the slot cover clamp.
Ê Carefully remove the expansion card from its slot.
9.5.2.3

Installing the slot cover

V
CAUTION!
Always replace slot covers into unused PCI slot openings to comply with
applicable EMC regulations and satisfy cooling requirements.
Figure 224: Installing the slot cover
Ê Insert a PCI slot cover into the unused PCI slot opening (1).
Ê Clip on the PCI slot cover clamp.
Ê Fold down the locking handle on the PCI slot cover clamp until it locks in
place (2).
9.5.2.4 Concluding steps
Ê If applicable, "Installing the PCI air duct" on page 87
"Reassembling" on page 68
Ê
"Connecting the power cord" on page 81
Ê
"Switching on the server" on page 82
Ê
"Resuming BitLocker functionality" on page 127
Ê
TX2550 M4
Expansion cards and backup units
Upgrade and Maintenance Manual
319