Connecting Cables - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX2550 M4:
Table of Contents

Advertisement

Hard disk drive (HDD) / solid state drive (SSD)
7.8.1.4

Connecting cables

Example 16x 2.5-inch HDDs and HDD extension box
Figure 190: Example 16x 2.5-inch HDDs and HDD extension box
Ê Connect the cables:
1
SAS cable C10 from SAS expander board connector X1 to the
connector MLC1 on the SAS controller
2
SAS cable C10 from SAS expander board connector X2 to the
connector MLC2 on the SAS controller
3/4/5
SAS cable C11 from SAS expander board connectors X10-X15 to
the backplane connectors X9/X10
6
Power cable C26 from SAS expander board connector X3 to
backplane 1 connector X17
7/8/9
Power cables C6 from backplane connectors X40 to system board
connectors
Ê If applicable, connect the OOB cable, see section
cable" on page
278
"PWR1", PWR2", and "PWR3"
488.
Upgrade and Maintenance Manual
"Replacing the OOB
TX2550 M4

Advertisement

Table of Contents
loading

Table of Contents