Removing The M.2 Ssd - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

System board and components

14.5.2 Removing the M.2 SSD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– Hexagon screw driver (for moving the screw to another bolt)
14.5.2.1 Preliminary steps
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
"Removing the system air duct" on page 67
Ê
"Removing the PCI air duct" on page 86
Ê
Ê If applicable, "Removing the riser module" on page 84
"Removing the crossbar" on page 88
Ê
Ê If applicable, "Removing an expansion card" on page 318
14.5.2.2 Removing the M.2 SSD
Figure 311: Removing the M.2 SSD (A)
Ê Remove the screw (see circle).
436
Upgrade and Maintenance Manual
Hardware: 5 minutes
TX2550 M4