Removing The Fbu With The Holder - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

9.7.2.2

Removing the FBU with the holder

Figure 240: Disconnecting the FBU adapter cable from the FBU cable
Ê Lift up the green locking handle on the holder (see circle) while sliding the
holder in direction of the arrow as far as it will go.
I
After that, the shoulder screw caps on the system air duct will rest in
the wide ends of the keyhole slots on the holder.
Ê Lift the holder from the system air duct.
TX2550 M4
Expansion cards and backup units
Upgrade and Maintenance Manual
341