Removing The Ocp Module - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

9.4.2

Removing the OCP module

Upgrade and Repair Unit
(URU)
Tool: Phillips PH1 / (+) No. 1 screw driver
9.4.2.1 Preliminary steps
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
Ê If, applicable, remove the riser module, see section
module" on page
TX2550 M4
84.
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
"Removing the riser
307