Hard disk drive (HDD) / solid state drive (SSD)
7.6.2.3
Installing the new PCIe SSD backplane
Figure 178: Installing the PCIe SSD backplane
Ê At a slight angle, fit the PCIe SSD backplane into the three recesses in the
PCIe SSD extension box (1).
Ê Fold down the PCIe SSD backplane (2).
Ê Fasten the PCIe SSD backplane with two screws (see figure 176).
Ê Install the 8x 2.5-inch PCIe SSD extension box, see section
8x 2.5-inch HDD/SSD extension box" on page
7.6.2.4
Concluding steps
Ê If applicable, install the fan bridge, see section
page
90.
"Installing the system air duct" on page
Ê
"Reassembling" on page 68
Ê
268
Upgrade and Maintenance Manual
242.
"Handling fan bridges" on
68.
"Installing the
TX2550 M4