Table of Contents
Advertisement
Converting a floorstand model to a rack model
Figure 343: Installing accessible drive dummy covers
Ê If available, reinstall all accessible drive dummy covers into their original
locations (rotated by 90 degrees):
Ê Ensure that an accessible drive filler cover has been installed in every
empty drive bay.
Ê Turn the front cover face down.
Ê Join the two lugs on one edge of the accessible drive cover with the right
inner edge of the front cover (1).
Ê Fold down the accessible drive cover until it snaps in place (2).
I
Use the dummy covers that have been removed from the front cover
during the preliminary steps.
Ê Install the rack front cover, see section
page
69.
478
Upgrade and Maintenance Manual
"Installing the rack front cover" on
TX2550 M4
Advertisement
Table of Contents
