Breaking Out The Metal Cover - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX2550 M4:

Table of Contents

Serial interface

15.1.1.2 Breaking out the metal cover

Figure 326: Breaking out the metal cover

Ê If applicable, break out the metal cover from the rear by using a flat screw

driver (see close-up)

Ê Insert the serial interface from inside and secure it with the two hexagon

bolts UNC 4-40 (see circles).

15.1.1.3 Installing the serial interface

Ê If applicable, remove an expansion card, see section

expansion card" on page

Bearbeitungsstand

"Removing an

Bestellnummer