Table of Contents
Advertisement
9.5.3.2
Removing the expansion card
Ê Remove the expansion card, see section
page
318.
Ê If applicable,
"Removing an SFP+ transceiver module" on page
Ê If the slot bracket on the defective expansion card is to be reused:
"Removing a slot bracket" on page 296
9.5.3.3
Installing the expansion card
Ê If applicable,
"Installing a slot bracket" on page 295
Ê If applicable,
"Installing SFP+ transceiver modules" on page
Ê Install the expansion card, see section
page
312.
9.5.3.4
Concluding steps
Ê If applicable,
"Installing the PCI air duct" on page 87
"Reassembling" on page 68
Ê
Ê Connect all external cables to the replaced expansion card.
"Connecting the power cord" on page 81
Ê
"Switching on the server" on page 82
Ê
"Enabling replaced components in the BIOS" on page 121
Ê
Ê Inform the customer about changed WWN, MAC and SAS addresses, see
section
"Looking up changed MAC/WWN addresses" on page
"Updating the NIC configuration file in a Linux and VMware environment" on
Ê
page 126
"Updating expansion card firmware" on page 113
Ê
"Enabling SVOM boot watchdog functionality" on page 121
Ê
"Resuming BitLocker functionality" on page 127
Ê
TX2550 M4
Expansion cards and backup units
Upgrade and Maintenance Manual
"Removing an expansion card" on
"Installing an expansion card" on
300.
297.
129.
321
Advertisement
Table of Contents
