Table of Contents
Advertisement
"Resuming BitLocker functionality" on page 127
Ê
"Switching on the server" on page 82
Ê
7.7.2
Upgrading with non-hot-plug HDDs/SSDs
Customer Replaceable Unit
(CRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.7.2.1
Preliminary steps
"Suspending BitLocker functionality" on page 105
Ê
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
"Removing the system air duct" on page 67
Ê
Ê Remove the fan bridge, see section
7.7.2.2
Upgrading with non-hot-plug HDDs/SSDs
Ê Install the non-hot-plug HDDs/SSDs, see section
HDD/SSD" on page
Ê Install the non-hot-plug cage, see section
on page
271.
TX2550 M4
Hard disk drive (HDD) / solid state drive (SSD)
"Handling fan bridges" on page
271.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Installing a non-hot-plug
"Installing the non-hot-plug cage"
90.
273
Advertisement
Table of Contents
