Installing The Ultraslim Odd Adapter - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Accessible drives
Figure 289: Removing the ultraslim ODD from the ultraslim ODD adapter
Ê Remove the two screws (1).
Ê Remove the ultraslim ODD (2).
Ê If the removed ultraslim ODD is not to be replaced by a new drive:
Ê Insert the ultraslim ODD dummy cover (see figure 286).

12.6.2.4 Installing the ultraslim ODD adapter

Ê Install the ultraslim ODD adapter, see section
on page 379.
12.6.2.5 Concluding steps
Ê If applicable, install the expansion card, see section
card" on page
Ê Install the fan bridge, see section
Ê If applicable, "Installing the riser module" on page 85
"Installing the system air duct" on page 68
Ê
"Reassembling" on page 68
Ê
"Connecting the power cord" on page 81
Ê
"Switching on the server" on page 82
Ê
402
312.
Upgrade and Maintenance Manual
"Installing an accessible drive"
"Installing an expansion
"Handling fan bridges" on page 90
TX2550 M4