Cabling The 8X 2.5-Inch Hdd/Ssd Extension Box - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

7.5.2.5

Cabling the 8x 2.5-inch HDD/SSD extension box

Figure 159: Connecting the 8x 2.5-inch HDD/SSD extension box
Ê Connect the following cables:
1 SAS cable C11 on SAS
expander board connectors
X14/X15
2/4 SAS cable C11 on
backplane connector
X9/X10
Ê Connect the power cable C6 to the connector "PWR3" on the system
board.
Ê If applicable, connect the OOB cable, see section
cable" on page
I
For the cable plan see chapter
TX2550 M4
Hard disk drive (HDD) / solid state drive (SSD)
488.
"Appendix B" on page
Upgrade and Maintenance Manual
3 Power cable C6 on
backplane connector X40
"Replacing the OOB
517.
245