Locking The Server - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Basic hardware procedures
4.5.3.4

Locking the server

Figure 32: Locking the server
Ê Insert the key into the lock on the HDD cover (1).
Ê Turn the key counter-clockwise (2) to lock the front and side covers.
Ê Remove the key from the server front.
Figure 33: Storing the key ring
Ê Insert the keychain into the slot on the server rear (1).
Ê Turn the keychain clockwise by 90 degrees (2) until it latches in place as
shown (3).
80
Upgrade and Maintenance Manual TX2550 M4