Table of Contents
Advertisement
Converting a floorstand model to a rack model
Removing the accessible drive cage
Ê Remove the front panel module, see section
module" on page
Ê If applicable, remove all accessible drives, see section
accessible drive" on page
Ê If applicable, remove an HDD extension box, see section
extension boxes" on page
Figure 334: Detaching the accessible drive cage (A)
Ê Remove the two screws (see circles) from the bottom side of the server.
Ê Bring the server back to its horizontal position.
I
At least two people are needed to turn over a fully equipped server.
Remove HDDs and PSUs in order to facilitate the task.
470
407.
386.
241.
Upgrade and Maintenance Manual
"Removing the front panel
"Removing an
"HDD/SSD
TX2550 M4
Advertisement
Table of Contents
