Installing A 3.5-Inch Hdd Sas Backplane - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX2550 M4:

Table of Contents

Hard disk drive (HDD) / solid state drive (SSD)

Installing a 3.5-inch HDD SAS backplane

Figure 144: Installing the new 4x 3.5-inch HDD SAS backplane (A)

Ê Fit the SAS backplane into the guide on the outer wall of the HDD bay (see

close-up) and lower it into the bottom rim.

Figure 145: Installing the new 4x 3.5-inch HDD SAS backplane (B)

Ê Ensure that the 4x 3.5-inch HDD SAS backplane is properly seated into the

bottom rim and side guide (see arrows).

Upgrade and Maintenance Manual